Can You Fix One Bad Section of an AI Video Without Regenerating It?

Yes, you can fix part of an AI generated video with range-based editing. Runway's Aleph 2.0 charges 28 credits/sec with a 56-credit minimum. Here's the math.

GGoFaceless Team9 min read
Editorial illustration of a single defective segment being lifted out of a video timeline for targeted AI repair

Yes, you can fix part of an AI generated video without regenerating the whole clip. Range-based editing tools such as Runway's Edit Studio let you select only the defective portion of a shot and apply an AI edit to that range, billing for the edited seconds rather than the full clip. A two-second repair on Aleph 2.0 costs 56 credits at documented rates.

Key takeaways:

  • Runway's Edit Studio documentation states that editing a selected range consumes credits for that portion rather than the entire clip, so a localized defect does not require a full regeneration.
  • Aleph 2.0 editing costs 28 credits per second with a 56-credit minimum, which means any repair under two seconds still bills 56 credits.
  • Supported inputs for range-based editing are 2–30 seconds long, up to 1080p resolution and 30 frames per second.
  • Keyframe-image generation is charged separately from the per-second editing rate, so it adds to the repair bill on top of the 56-credit minimum.
  • A lower billed duration does not guarantee a successful repair; two failed two-second attempts cost more than one clean full regeneration of a short clip.
Decision criterionRepair the selected rangeRegenerate the whole shot
Billed unit28 credits/sec of edited range, 56-credit minimumFull clip duration at generation rates
Two-second defect on a 10-second clip56 credits (minimum applies)Full 10-second regeneration cost
Input limits2–30 sec, up to 1080p, 30 fpsSet by the generation model
Continuity with approved footagePreserved outside the edited rangeEntire shot changes; re-review everything
RiskRepair may fail; retries each bill the minimumNew clip may introduce new defects elsewhere
Keyframe imageCharged separately if usedMay be included in generation flow

Which should you choose?

Repair the range when the rest of the shot is already approved and the defect is localized: a warped hand in seconds 6–8, a flickering background object, a lip-sync slip on one word. Regenerate the whole clip when the defect is structural (wrong subject, wrong camera move, wrong composition across most of the shot), when the clip is so short that the 56-credit minimum approaches full regeneration cost anyway, or when you have already burned two repair attempts without a clean result.

When should I repair an AI clip instead of regenerating it?

Repair an AI clip instead of regenerating it when the shot is otherwise usable and the defect is confined to a identifiable time range. Runway's Edit Studio documentation says that editing a selected range consumes credits for that portion rather than the entire clip, which makes targeted repair the cheaper first move for localized problems on longer shots (Runway Help Center).

The decision rule that belongs to this article: repair when the defect covers less than roughly a third of the shot and the surrounding footage is already approved; regenerate when the defect is the shot.

A concrete example. You have a 12-second b-roll shot of a desk setup for a faceless productivity video. Seconds 7–9 contain a morphing keyboard. Everything else is good, the narration is already cut to it, and the caption timing matches. Repairing the two-second range bills 56 credits. Regenerating the full 12 seconds bills the full duration and forces you to re-review the entire shot, re-check continuity with the clips before and after, and possibly re-time captions. The repair is the rational first attempt.

The opposite case: a 4-second clip where the subject itself is wrong. The 56-credit minimum already covers two seconds, half the clip, and a range edit cannot fix a fundamentally wrong subject. Regenerate.

Illustration of a video timeline with one defective segment highlighted for targeted repair
Illustration of a video timeline with one defective segment highlighted for targeted repair

Does editing a selected range charge for the whole video?

No. Editing a selected range in Runway's Edit Studio charges only for the portion you edit, not the entire clip, according to Runway's Edit Studio documentation. The billing unit is the edited duration at 28 credits per second for Aleph 2.0, subject to a 56-credit minimum per edit.

Two implications follow from that billing structure:

  • The minimum dominates short repairs. Any edit of two seconds or less bills 56 credits. There is no 10-credit quick fix.
  • Retries are not free. Each repair attempt is a new edit. Two failed two-second attempts cost 112 credits, which can exceed the cost of regenerating a short clip outright. Budget for at least one retry when you compare options, and keep a record of what each attempt cost, the same discipline described in the production records worth saving for every AI-assisted video.

This is also why the repair-versus-regenerate question is an editing decision, not a refund question. If a clip arrives unusable and you are wondering whether credits can come back at all, that is a separate policy question covered in whether you can get AI video credits back for an unusable clip.

How much would a two-second AI video repair cost in credits?

A two-second repair with Aleph 2.0 in Runway's Edit Studio costs 56 credits, because the documented rate is 28 credits per second with a 56-credit minimum, and two seconds at that rate (56 credits) lands exactly at the minimum before any separately charged keyframe-image generation (Runway Help Center).

The math scales linearly above the minimum:

  • 1-second repair: 28 credits calculated, 56 credits billed (minimum applies)
  • 2-second repair: 56 credits
  • 3-second repair: 84 credits
  • 5-second repair: 140 credits
  • 10-second repair: 280 credits
Billed credits by repair duration at 28 credits/sec with a 56-credit minimum
1 sec (minimum)56 credits2 sec56 credits3 sec84 credits5 sec140 credits10 sec280 credits

The 56-credit minimum makes one- and two-second repairs cost the same, so trimming a repair below two seconds saves nothing.

Billed credits by repair duration at 28 credits/sec with a 56-credit minimum
1 sec (minimum)56 credits
2 sec56 credits
3 sec84 credits
5 sec140 credits
10 sec280 credits
Source: Runway Help Center: Creating with Edit Studio

Two honest caveats. First, a lower billed duration does not guarantee a successful repair, so the expected cost of a fix is the per-attempt cost multiplied by the number of attempts you actually need. Second, if your repair workflow uses a generated keyframe image to guide the edit, that image generation is charged separately and adds to the total.

What clip lengths, resolutions, and frame rates are supported?

Runway's Edit Studio supports input clips of 2 to 30 seconds, at a maximum of 1080p resolution and 30 frames per second, per the Edit Studio documentation. Clips outside those bounds need to be trimmed, downscaled, or conform to 30 fps before a range-based repair is possible.

Practical consequences for a faceless workflow:

  • Shorts and Reels b-roll fits comfortably. Most faceless shots run 3–8 seconds, well inside the 2–30 second window.
  • 4K masters need a downscale first. If your master timeline is 4K, export a 1080p version of the shot for repair, then upscale or replace on the timeline.
  • High-frame-rate footage needs conforming. A 60 fps clip must be conformed to 30 fps, which changes motion cadence; check that the conformed version still matches your edit before repairing it.

If your shot falls outside these limits, full regeneration inside the same tool, or a repair in a different tool, becomes the default rather than a choice.

Does generating a keyframe image cost extra?

Yes. Keyframe-image generation carries separate charges on top of the per-second editing rate, according to Runway's Edit Studio documentation. A two-second Aleph 2.0 repair that uses a generated keyframe therefore costs 56 credits for the edit plus whatever the keyframe generation bills.

When is the keyframe worth the extra charge? When the defect involves specific visual content you can describe better with an image than with a text prompt alone: a particular object, a corrected hand pose, a replacement background element. When the fix is a motion or texture cleanup that a text instruction covers, skip the keyframe and keep the bill at the per-second rate. Either way, factor the keyframe charge into your repair-versus-regenerate comparison rather than discovering it on the invoice.

Illustration of checking continuity at the seam between original and repaired video frames
Illustration of checking continuity at the seam between original and repaired video frames

How should I check continuity after repairing one section?

Check continuity by reviewing the repaired range together with at least one second of footage on each side of the edit boundary, at full playback speed and frame by frame. A range repair can look perfect in isolation and still betray itself at the seams through lighting shifts, motion-direction changes, or audio pops.

A practical checklist:

Boundary frames: Step through the first and last five frames of the repaired range. Look for jumps in object position, exposure, or color between the original footage and the repaired section.

Motion vectors: Play the transition at full speed. A person or camera moving left-to-right before the repair should still be moving left-to-right after it.

Lighting and grain: Compare shadow direction and noise texture across the boundary. AI repairs often smooth grain, which reads as a soft patch on the shot.

Audio sync: If the shot carries dialogue or synced sound, confirm the repaired section still lands on the narration beats. A visual fix that shifts timing by a few frames can throw off captions you already timed.

Full-context pass: Watch the shot inside the assembled sequence, not just in the repair tool. Continuity errors that are invisible on a solo clip become obvious between the preceding and following shots.

If the repair fails two of these checks after two attempts, stop repairing and regenerate the shot. That is the point where the cumulative minimum charges have usually overtaken the cost of starting fresh.

Once you have a clean replacement shot, you need somewhere to assemble it with the narration and captions you already approved. An AI faceless-video platform such as GoFaceless (our own product) is one option for rebuilding the finished short around an approved replacement clip, pairing it with the existing AI voiceover and captions in one pass, provided your workflow supports importing replacement footage. For simpler cases, any standard editor that lets you swap a clip on the timeline does the same job.

Putting the decision to work

The next time one bad section threatens an otherwise good shot, run the numbers before touching anything: defect duration times 28 credits, floored at 56, plus any keyframe charge, multiplied by the attempts you are realistically willing to make. Compare that figure with the full regeneration cost and the re-review time a new clip demands. If you produce faceless shorts regularly and want the assembly side handled for you, GoFaceless turns a topic into a finished video with script, voiceover, visuals, and captions, and plans start at $29 per month.

Sources & further reading

Keep reading

Ready to create your first video?

See examples made with GoFaceless. Create your own through a card-required one-video trial; after the trial, your selected plan begins unless you cancel.